Knowledgebase
emscom > emscom Help Desk > Knowledgebase

Search help:


Messages forwarding SMS

Solution

After Mavericks. Apple have made configuring SMS message forwarding less than intuitive.

Particularly, the authorisation code (pin) which needs to be entered on the sending device (Mac), does not appear automatically, when the forwarding device (iPhone) is enabled.

 

1. The sending device and forwarding device must be signed into the same appleID account.

2. The sending device and forwarding device should be on the same network during configuration

3. Configure e-mail ID on forwarding device, this is typically the appleID

3.1 On the iPhone, open Settings, Messages, Send and Recieve, Can Be Reached At:

3.2 Verify a check mark (tick) appears next to the e-mail address.

3.3 Verify a check mark (tick) appears nect to the iPhone mobile number

http://www.igeeksblog.com/sms-relay-not-working/

 

 

 
Was this article helpful? yes / no
Related articles 01 ERL3 Basic Setup
OSX Rescue Files fom non-booting system
Article details
Article ID: 79
Category: OSX
Date added: 26-01-2016 05:45:32
Views: 121
Rating (Votes): Article not rated yet (0)

 
« Go back

 
Powered by Help Desk Software HESK, in partnership with SysAid Technologies